Basic operation
6. Editing a programCopying drawbar parameters
You can edit the sound or name of the selected program.
The Drawbar 1 or Drawbar 2 settings can be copied
When editing a program, it is a good idea to start bydirectly into the OUPPER� parameters or OLOWER�
selecting the program that is closest to the sound youparameters of a program.
want.
As an example, hereOs how you can use front panel
This section provides several examples of editing that youDrawbar 1 to create a sound, and then copy those settings
can do easily.to the OUPPER� parameters of the program.
1. In Normal mode, select a program.
Editing the drawbar parametersUse the [�]/[+] keys to select a program, and use the
PROGRAM [1]�[8] keys to select the number of the
You can use front panel Drawbar 1 or 2 to modify theprogram you wish to edit.
drawbar parameter settings of a program.Notice that the display shows the program number
In the following example, we will modify the parametersand program name.
of a Normal mode program.
2. In the DRAWBAR SELECT section, press the
1. In Normal mode, select a program.UPPER [DRAWBAR 1] key.
Use the [�]/[+] keys to select a program, and use theNotice that the key LED is lit.
PROGRAM [1]�[8] keys to select the number of the3. While playing the keyboard, use the bars of
program you wish to edit.
Drawbar 1 to create the desired sound.
Notice that the display shows the program number
and program name.4. Hold down the UPPER [DRAWBAR 1] key, and
press the UPPER [DRAWBAR PRESET] key.
2. Press the [EDIT] key.
You will enter Normal Edit mode.
3. Press the PROGRAM [2] key.
The left side of the display will indicate UPPER, and
the OUPPER� parameter settings will appear at the
right.
4. Make sure that the UPPER [DRAWBAR PRESET]
key LED is lit.The Drawbar 1 bar settings will be copied to the
If it is blinking, press the UPPER [DRAWBAR PRE-
SET] key.OUPPER� parameters, and an O � will be displayed
between the program number and the program name.
If you wish to verify that the settings have been
changed, press the [DISPLAY] key once when the
program name is displayed. The drawbar settings
will appear in the display.
Alternatively, you can use the [EDIT] key to enter
Normal Edit mode, and press the PROGRAM [2] key
to view the settings.
5. Move the Drawbar 1 or Drawbar 2 bars (you mayIf you select another program or turn off the power
before writing the modified settings, the settings will
use either) to set the drawbar parameters.revert to their previous values. If you wish to write
The value of the bar you move will be input as theyour settings into memory, refer to OWriting a
parameter value, and the display will change accord-
program� (p.15).
ingly.Drawbar parameters can also be copied in EX mode.
6. To return to Normal mode, press the [EXIT] key.
In step 1, select an EX mode program.
If you select another program or turn off the powerIn step 2, press the UPPER [DRAWBAR 1] key or the
before writing the modified settings, the settings willUPPER [DRAWBAR 2] key, and use the respective
revert to their previous values. If you wish to writebars to create the desired sound.
your settings into memory, refer to OWriting aIn step 4, hold down either the UPPER [DRAWBAR
program� (p.15).1] key or the UPPER [DRAWBAR 2] key, and press
the UPPER [DRAWBAR PRESET] key.
If you select another program or turn off the power
before writing the modified settings, the settings will
revert to their previous values. If you wish to write
your settings into memory, refer to OWriting a
program� (p.15).
14 |
ACEC
